Install Windows XP Faster

In this post I will tell you about installation of win XP in minimum time period. Normally when someone tries to install windows XP on computer, it takes around 30-40 min to complete entire setup. It is too much time to install windows setup. I will tell you a method to install windows more faster. It will take approximately 15 minutes to complete windows installation. So to install win XP in short time please follow these steps.
Power on your computer and start with bootable windows XP cd
In first step window will load installation files.
Select any drive ( C: ) for installation.
Select NTFS to format the partition.
Setup will copy files on this drive and it will try to restart PC.
After restarting when you see Xp logo, press (Shift+F10).
It will open (CMD) prompt.
In CMD prompt type (Taskmgr)
It will open task manager. Now go to “process” tab and find “Setup exe” Right click on setup.exe and select “Set priority”
You will see a submenu. Here priority will be normal. Select priority to (High) or above (Normal).

Done.


This will complete installation process much faster than the normal original time.
Try it….......

Difference Between TFT and LCD.

This is a common question when have been asked about several times by many people. Every body wants to know that what is the difference between a LCD and TFT. So i figured out, i should answer this question for anyone who has doubts.


LCD stands for Liquid Crystal Display... and
TFT stands for Thin Film Transistor.


TFT is not really different from LCD. It comes from the family of LCD technology. We can say that it is a modern version of the LCD Technology. A TFT provide a well improved image quality.
There are two typs of display quality. 1st one is Matty and 2nd is Grossy. Matty display is called LCD and Grossy display is called as TFT. LCD and TFT consumes less power energy as compared to CRT (Cathode ray tube).
Now a days TFT has been used for mobile phone devices, projectors, nevigation systems as well as TVs and computer monitors.

Increase Speed of Hard Disk

It is common observation that some times our computer slows down due to low performance of hard drive. This problem happens due to the slow performance or poor speed of hard drive. When we say about poor performance, actually we mean, poor speed of reading/writing of hard drive. This problem can be solved by increasing the hard drive speed. Follow these steps to solve your problem.




Click Start menu and select run.
Now type (sysedit.exe) in run and press enter.
System configuration editor will appear.
Here you can see some multiple windows but you will select (system.ini).
This window contains a line (386enh)
Now after this line type (irq14=4096)
Now close this window and save it.
Reboot your computer now.
You will surely feel better performance of your computer.
Enjoy.

Get Back Your Recycle Bin

Recycle Bin is used to keep unnecessary files or folder. Some of my visitors asked about this problem that how they can get back their recycle bin after deleting it on windows XP.
You can use this method to get back recycle bin.

Important Note:

For this purpose you will have to modify the Registry. It is strongly recommended that if you have some basic knowledge of registry then you can try it. Otherwise some serious problems might occur if you modify the Registry incorrectly. Now let’s try it. Follow these steps carefully to edit the registry to make the Recycle Bin icon reappear on your desktop.

• Click START and then click RUN
• Now type “ regedit” and then click OK.
• Locate the following registry key
• HKEY_LOCAL_MACHINE\SOFTWARE\Microsfot\windows\Currentversion\Explorer\Desktop\namespace 
• Right click the registry key that you located in number, Point to new and then click key.
• Now Type {645FF040-5081-101B-9F08-00AA002F954E} and press Enter.
• After this click the new {645FF040-5081-101B-9F08-00AA002F954E} key.
• In the right, use your mouse to double click the default entry.
• You will see a “Edit string dialog box”. Type Recycle Bin in the value data box and finally click OK.
• Now close your registry Editor and check your desktop.
• You will see recycle Bin icon on your desktop wall.

Reslove Server Security Certificate is Not Valid

Many time its happen when you install new Operating system in your desktop or laptops and then you install Browser, google chrome. After installation you try to open gmail, yahoo, or facebook in google chrome but you do not see your required page and see a message “Server Security Certificate is not yet valid”. Then you also try to open the page by clicking on “continue anyway” but the result is same.







Infect this problem occurs due to incorrect date and time of your computer. By synchronizing your system clock you can solve this problem.
I will tell you the best solution of this problem. Just follow these steps and after completion you will be able to login to facebook, yahoo, gmail etc.



Click on Start Menu and then control penal.

Open Date/Time setting

Adjust correct date and time according to your region.

Open "Internet Time Zone" tab.

Click on "Update Now" button. After clicking on button, It will start synchronzing your internet server timing.

After 7-8 seconds you will see a message, "The time has been successfully synchronized with time.windows.com on 07-07-2013 at 5:09PM.

Connect a Laptop or Desktop Computer to a TV

If  you wish to watch anything from mobile to TV but have a screen that leaves much to be desired. In such a situation, you can connect your computer to a television screen to allow your entire family to enjoy comfortably.

There are many ways in which you can connect your laptop/ computer to a television. However, the overall video quality will be different for different methods. You can choose which one to use based on the quality or the availability of hardware. The first step is to know what type of ports and connections your TV and computer have. If you already know the type of ports and connections available on your hardware, you can directly jump to Step 2. If not, then the different types of ports are explained in detail below:-

Different types of PC to TV connection ports

1) RCA/Composite: The oldest and the lowest quality connection available. They are the Yellow, Red and White connections most of us are familiar with. Yellow is used for composite video, white for left analog audio and red for right analog audio.

2) S-Video: S-Video or Super Video offers slightly better quality than Composite connections. As it is one of the oldest type of connections available, most televisions and computers have it. There are two types of S-Video ports, one containing 4 pins and the other containing 7 pins. This type of connection is used only for video. So you will need to connect an audio cable from your computer's headphone jack to the red and white audio inputs on your TV if you want audio to work.

3) VGA(Video Graphics Array): Most computers and televisions have a VGA port. It offers much better quality than S-Video and should be preferred if you have a HDTV. Older CRT TVs however, will not have a VGA port and will require a PC to Television converter. Just like S-Video, VGA also does not support audio and will require an additional audio cable.

4) DVI: Digital Video Interface offers much better quality than VGA connections. Most laptop computers and HD TVs will have these connections. Just as the name suggest, this type of connection can be used only with digital TVs. Also like the previous two, DVI connections also require the use of an audio cable for audio to work.

5) HDMI: The highest quality connections available. Most HD TVs will have this connection, however, chances are that your computer would not. If your computer happens to have a HDMI connection port, this should be preferably used. If your computer doesn't, you can use an HDMI to DVI adapter to convert HDMI to DVI. 

Step 2: Once a common type of port between the two devices is recognized, you will need the right connector cable to physically connect them. The different types of connector cables are pictured above. If you do not find two matching types of connection ports, you will need an adapter to make the connections type match.

Step 3: After connecting the two devices, on your TV, select the external input with which your TV is connected to the computer. It may be HDMI1 or AV1 depending on how you have made the connection. This is much similar to how you select input from your DVD player.

If you have followed the steps correctly, your TV should now be displaying your computer's screen.

Important: If your computer is not recognizing the external display, you must connect the TV before starting your computer. If the picture appears distorted, you will need to change the screen resolution of your TV by altering the display settings from your computer. Most older TVs will support only one display resolution while newer TVs will support plenty of them.

Hide Files or Folders Using Command Prompt

      Here is Example how its works: You have a folder named "myfile" and this folder is stored in (Disk Drive F). You think that it should not be seen by strangers who use your PC.so there is simple way just follow step



For that you need to follow the following instructions



1). Press windowkey+R: Run command dialog box appears.

2). Now type "cmd" and hit enter. A command prompt window displays.



        3).Now type "attrib +s +h F:\myfile" and hit enter.

4). The folder "myfile" will be hidden (Note: It cannot be viewed by any search options)


Remember :- To view this folder again, use the same command but replace '+' with '-' on both flags 's' and 'h')

Create Folders And Files Without Name

Here you will know  to create files and folders without any name.

Just follow the steps as given below :-

1) Select any file or folder.

2) Right click on it, select 'Rename' or simply press 'F2'.

3) Press and hold the 'Alt' key. While holding the Alt key, type numbers '0160' from the numpad.



Note :- Type the numbers '0160' from the numpad, that is, the numbers present on the right side of the keyboard.
Don’t type the numbers which are present on top of the character keys.

4) Press Enter and the nameless file or folder will be created.



Reason :- The file or folder that seems nameless is actually named with a single space.

But what if you want to create another nameless file or folder in the same directory ?
For this you will have to rename the file with 2 spaces.
Just follow the steps given below :-

1) Select file, Press 'F2'.

2) Hold 'Alt' key and type '0160' from the numpad.

3) Release the 'Alt' key. Now without doing anything else, again hold 'Alt' key and type '0160'.

4) Press 'Enter' and you will have second nameless file in the same directory.

5) Repeat step 3 to create as many nameless files or folders in the same directory.

(We have a problem with deleting these folders, to do so, start your computer in 'Safe Mode' and delete it from there.)

Change AM and PM Displayed Text

Change “AM” and “PM” Displayed Text To another text like "ante meridian" and "post meridian"




Start you for funny changing your change:-

step by step----->

1. Go To Start Menu.

2. Click Control Panel

3. Open Regional & Language Options

4. Go To Regional Options Tab

5. Click Customize Button

6. Go To Time Tab

and type in AM Symbol like "Ante Meridian" and PM Symbol box ante Post Meridian"

How to resolve automatic restarts problem in Windows 7

Many time you getting a problem when you laptops or desktop restart again an again this happen because of in your operating system there are a some error so see here how to resolve automatic restarts problem in Windows 7

Go To - Start -> Computer --> right click on "Properties", and then tap "Advanced system settings"

you will see a screen like that 

 In the advanced options of the system context menu, click on "Settings" for Startup and Recovery

In Startup and Recovery, uncheck the "Automatically restart" for system failure. Click "OK" after unchecking the checkbox

I think its help for you :)

HTML Basics

HTML Basics. Basics of Hyper Text Markup Language (HTML). You will learn to use HTML page to display in a web browser. 

Need a text editor, such as Notepad and an Internet browser, such as Internet Explorer or Google Crome

Open your Notepad and type the following text: 

<html>

<head>

<title> My First Webpage </title>

</head>

<body>

This is my first homepage. <b> This text is bold </b> 

</body>

</html>

Save the file as Index.html . Then Start Internet browser.Double Click and Open Your Index.html in your browser. Now you should see an address in the 

Details About code

The first tag in your html document is <html>. This tag tells your browser that this is the start of an html document. The last tag in your document is </html>. This tag tells your browser that this is the end of the html

document.

The text between the <head> tag and the </head> tag is header information. Header information is not

displayed in the browser window.

The text between the <title> tags is the title of your document. The <title> tag is used to uniquely

identify each document and is also displayed in the title bar of the browser window.

The text between the <body> tags is the text that will be displayed in your browser.

The text between the <b> and </b> tags will be displayed in a bold font. 

How to Make The Background of an Image Transparent in Photoshop

1. Make an image's background transparent

   1. First, you'll need to find the image you wish to edit.
   2. It's probably a good idea to save this image by clicking on File–> Save as. 
   3. Now that you have selected and saved the image, locate your layers panel and double-click the word that says “background”.

Network Troubleshooting using COMMANDS

 mstsc    - Opens the Remote Desktop (RDP) tool

 winmsd  - Opens the System Information dialog box

 inetcpl.cpil -  Opens the Internet Explorer Properties dialog box

 odbccp32.cpl -  Opens the ODBC Data Source Administrator

 mmc  - Opens the Microsoft Management Console (MMC)

 services.msc - Opens the Windows Services dialog box

 eventvwr.msc - Opens the Windows Event Viewer

 dsa.msc - Opens the Active Directory User and Computers management console

 dssite.msc - Opens the Active Directory Sites and Services management console

 adminpak.msi -  Launches the Administration Tools Pack installer

 dxdiag - Opens the DirectX Diagnostic Tool

 \\< Name or IP>\C$ - Opens a UNC to the C: share

 cmd - Opens the Windows Command Prompt using the 32-bit cmd shell

Network Troubleshooting using PING, TRACERT, IPCONFIG, NSLOOKUP COMMANDS

How To Hack The Administrator Password On WindowsXP

Hack The Administrator Password On Windows XP



Warning : This video is only made for Education Purpose all thing you want to do with the permission or its a needful

Open ports on windows to see who is connected to your own pc

Open ports on windows to see who is connected to your own pc



You can know who is connected with your computers or Laptops

Some cool notepad tricks

Some cool notepad tricks with that you can do funny thing with friends.



Note : Do all thing at Your own Risk And Enjoy :)

First Step To Check

Computer Problem 1st Check All Basic Thing are Proper

Basic Checklist

Check the Cables

Restart the Computer
Check the Cables
Beginner

What you can do

Check each cable on the computer to make sure it is plugged into the correct port, and that each cable is seated properly.

Our Advice

It is easy to overlook this step and waste time on other fixes. Take the time to check the cables- it is always a good idea.

Note:Sometimes there are multiple ports a cable can plug into. Make sure you identify the correct one to use for each cable.

Restart the Computer

Beginner

What you can do

Close all running programs, and completely power down the computer using the Shutdown button. Make sure the power light is off. Wait 15 seconds, then power it back on.

Our Advice

A portion of computer problems simply go away with a computer restart. It is always a good step to take if something is malfunctioning.

Note: Optionally, when the computer starts up, close any running programs.

Note: Optionally, when the computer is powered off, unplug the power for 20 seconds. This can identify power supply problems.

Note: A complete shutdown and start-up is called a cold boot.

Internet browser shortcut keys

Tabs

Ctrl+1-8 – Switch to the specified tab, counting from the left.

Ctrl+9 – Switch to the last tab.

Ctrl+Tab – Switch to the next tab – in other words, the tab on the right. (Ctrl+Page Up also works, but not in Internet Explorer.)

Ctrl+Shift+Tab – Switch to the previous tab – in other words, the tab on the left. (Ctrl+Page Down also works, but not in Internet Explorer.)

Ctrl+W, Ctrl+F4 – Close the current tab.

Ctrl+Shift+T – Reopen the last closed tab.

Ctrl+T – Open a new tab.

Ctrl+N – Open a new browser window.

Alt+F4 – Close the current window. (Works in all applications.)

Mouse Actions for Tabs

Middle Click a Tab – Close the tab.

Ctrl+Left Click, Middle Click – Open a link in a background tab.

Shift+Left Click – Open a link in a new browser window.

Ctrl+Shift+Left Click – Open a link in a foreground tab.

Navigation

Alt+Left Arrow, Backspace – Back.

Alt+Right Arrow, Shift+Backspace – Forward.

F5 – Reload.

Ctrl+F5 – Reload and skip the cache, re-downloading the entire website.

Escape – Stop.

Alt+Home – Open homepage.

Zooming

Ctrl and +, Ctrl+Mousewheel Up – Zoom in.

Ctrl and -, Ctrl+Mousewheel Down — Zoom out.

Ctrl+0 – Default zoom level.

F11 – Full-screen mode.

Scrolling

Space, Page Down – Scroll down a frame.

Shift+Space, Page Up – Scroll up a frame.

Home – Top of page.

End – Bottom of page.

Middle Click – Scroll with the mouse. (Windows only)

Address Bar

Ctrl+L, Alt+D, F6 – Focus the address bar so you can begin typing.

Ctrl+Enter – Prefix www. and append .com to the text in the address bar, and then load the website. For example, type acomsolutions into the address bar and press Ctrl+Enter to open www.acomsolutions.blogspot.com.

Alt+Enter – Open the location in the address bar in a new tab.

Search

Ctrl+K, Ctrl+E – Focus the browser’s built-in search box or focus the address bar if the browser doesn’t have a dedicated search box. (Ctrl+K doesn’t work in IE, Ctrl+E does.)

Alt+Enter – Perform a search from the search box in a new tab.

Ctrl+F, F3 – Open the in-page search box to search on the current page.

Ctrl+G, F3 – Find the next match of the searched text on the page.

Ctrl+Shift+G, Shift+F3 – Find the previous match of the searched text on the page.

History & Bookmarks

Ctrl+H – Open the browsing history.

Ctrl+J – Open the download history.

Ctrl+D – Bookmark the current website.

Ctrl+Shift+Del – Open the Clear Browsing History window.

Other Functions

Ctrl+P – Print the current page.

Ctrl+S – Save the current page to your computer.

Ctrl+O – Open a file from your computer.

Ctrl+U – Open the current page’s source code. (Not in IE.)

F12 – Open Developer Tools. (Requires Firebug extension for Firefox.)

Turn Off CD AutoPlay

Here the instruction to Turn off CD Auto-Play Easily

Go to Start Setting and single-click on Control Panel.

Double-Click the system icon.

Go to the Device Manger tab and double-click the CD-ROM branch.

Double-click the CD-ROM driver entry.

On the setting tab uncheck the Auto Insert Notification box.

To Enable AutoPlay Follow the instructions and check the Auto Insert Notification box.to suspend AutoPlay hold down the Shift key While inserting a CD. 

Use Kaspersky internet security 2012 Lifetime

HOW IT WORKS JUST FOLLOW THESE 7 STEPS:-

First of all disconnect your internet connection and Remove modem or Disconnect that EthernetCable. it is very necessary that to get lifetime Key of Kasper sky internet security 2012 .(copy this post and save it to notepad)
Delete the existing key (If You Have)
Now Open Kaspersky 2012 product Then Click on (Either KIS or KAV) settings
Un-check the “Enable protection” Check box
Go Then “Options’ In the settings window itself , And uncheck Below Line

a) “Enable Self-Defense”
”Disable External service control”

Goto Start>Run>Type “regedit”>Now enter then find

HKEY_LOCAL_MACHINE>SOFTWARE>KasperskyLab>environment.

From Right list >> double click on “ProductStatus”

Then , in the “Value Data” Field . replace “Released” with “Beta” and click OK


Now again Open Kaspersky 2012 product And Go settings Now Check Below these check boxes :-
i)”Enable protection” (In “Protection” sub menu)
ii)”Enable Self-Defense” (In “Options” sub menu)
iii)”Disable External service control” (In “Options” sub menu)
Click on “OK”

Close the error message saying that “Protection is not running” .
Couse ot Error massage that, you have not installed any key and the product is not registered also

Restart your PC !
NOTE:- You must Restart your PC Other then it will not work properly

Now , after restart , Open Your Kaspersky product .

Then click On License” (Somewhat in the middle in the bottom)

Click on “Activate new license”

then click on “Activate Beta License”

then click on “Next”

From Now You will Not Blacklist you will get 30 Days Genuine Key .Just click on Activate beta license and click on .Next . That's it The kaspersky server will give u an new 30 days genuine key . So Enjoy!!!

How to lock any file or folder without any software

You can easily Lock any file or folder without any software

Hidden folders do not work as they can be easily searched with Windows Search. So, we need analternative way to create hidden password protected folders which only we can access. And that is exactly what we will learn in this post.

With this trick, you can create a secure password protected folder in Windows which no one except you can access. To use this trick, follow the instructions given below:-
1. Open Notepad.
2. Copy and paste the exact code given below:-

cls 
@ECHO OFF 
if EXIST "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" goto UNLOCK
if NOT EXIST MyFolder goto MDMyFolder 
:CONFIRM 
echo Are you sure to lock this folder? (Y/N) 
set/p "cho=>" 
if %cho%==Y goto LOCK 
if %cho%==y goto LOCK 
if %cho%==n goto END 
if %cho%==N goto END 
echo Invalid choice. 
goto CONFIRM 
:LOCK 
ren MyFolder "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" 
attrib +h +s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" 
echo Folder locked 
goto End 
:UNLOCK 
echo Enter password to Unlock Your Secure Folder 
set/p "pass=>" 
if NOT %pass%== 12345 goto FAIL 
attrib -h -s "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" 
ren "Control Panel.{21EC2020-3AEA-1069-A2DD-08002B30309D}" MyFolder 
echo Folder Unlocked successfully 
goto End 
:FAIL 
echo Invalid password 
goto end 
:MDMyFolder
md MyFolder
echo MyFolder created successfully 
goto End 
:End 

3. Click on the File Menu. Click on Save As.
4. Select All Types (or all files) in the Save As Type dropdown menu. Save the file as *.bat or Locker.bat

After creating the file, double click on the Saved file. A new folder will be created. Enter your data in the folder. Again, double click on the batch file. Type Y and press Enter. The folder will be hidden from view.

To re-view your folder, double click on the saved batch file. Enter password as

" 12345 " without quotes ("") and press Enter key. This is also the default password. Your folder will be visible again.

To change the default password, edit the part of the code given in blue and enter your own password.

The overall usability of this trick can be improved by deleting the batch file after hiding your folder and re-creating it when you wish to access your folder again.

If you face any problem using this trick, you can write a comment and I will do my best to help you.

Note : This works on Windows 7, Windows XP and Vista. First try this on useless data to be sure and then only hide your personal data.

WhatsApp Hacks

WhatsApp Hacks That You Might Not Know

Sometimes small hacks makes impossible things possible like you can recover WhatsApp messages, prank your friend by changing his profile picture or by creating a fake conversation. So, Lets get started with these awesome WhatsApp hacks.

1. How to recover deleted chat history?

If you have deleted your WhatsApp messages by mistake or by any other reasons recover them easily by applying these steps:

• Firstly uninstall your WhatsApp
• Then re install it
• Now simply tab restore
• That’s all, your last seven days old chat is restored.

2. How to prank your friend by changing his profile picture?

In this hack you can prank your friend by displaying how he/she appears on his profile. Simply you just have to replace your friend’s profile picture in your SD card.

• Firstly find an another picture of your friend.
• Re-size that picture, the dimensions of that picture should be 561 x 561 pixels,
• Now go to your SD card > WhatsApp > Profile Pictures and find your friends picture.
• Replace that picture with the another picture.
• Then force stop your WhatsApp and restart it again, that’s it.

iOS users can also do the same by using IFunBox.

3. How to create a fake conversation to prank your friends?

Its simple as 1234

• Download and install Yazzy (Fake Conversations)
• And Start creating fake conversations, it’s also work for Facebook messenger.

4. How to View WhatsApp Message Backup File Online?

There is website named as Recover Messages that allows you to browse and retrieve data from applications that use SQLite as a database, such as WhatsApp, Line, Spotbros etc.

How to Unlock Android Pattern Lock

Google developed android pattern lock for android user’s convenience and security. But what if you forgot that pattern, sometimes even we will not able to reset that pattern lock through forgot password. That’s why i decided to teach you how you can unlock that pattern lock.

I have two methods for unlocking your android device from pattern lock.

1. Unlock android pattern lock using Android SDK Tools.

2. Unlock android pattern lock by resetting your phone to factory settings.

Unlock android pattern lock using Android SDK Tools.

This method allows you to unlock your android device without losing your data.

Requirements:

• Android SDK Tools
• Data cable
• USB debugging mode should be enabled on that locked device.  (Don’t worry if USB debugging mode is not enabled on that device you can use second method.)

Process:

• Download and install Android SDK tools to run ADB command.
• When you finished installing open it, now only check SDK Platform-tools and click on install packages.
• Connect your locked device with your system
• Goto Android SDK tools by default the path is Users > App Data > Local > Android > Android-SDK > Platform-tools
• Now hold SHIFT and right click on platform-tools folder
• Click on open command window
• Then command prompt will appears now type following commands one by one:
  adb shell
cd /data/data/com.android.providers.settings/databases
sqlite3 settings.db
update system set value=0 where name=’lock_pattern_autolock’;
update system set value=0 where name=’lockscreen.lockedoutpermanently’;
.quit

• That’s it,  restart your device.

Unlock android pattern lock by resetting your phone to factory settings.

This method is the easiest method for resetting pattern lock, but it will also reset your phone to factory settings with means all your apps and personal data will be deleted.

Process:

• Shutdown your android device
• Now restart it by pressing power button, then immediately press power button along with UP volume button.
• Then a recovery mode will appears, move up and down using volume buttons and select using Home button.
• Then select Restore Factory Settings/Delete all user Data.
• That’s all

How To Shutdown A Computer By Using Cell Phone

How To Shutdown A Computer By Using Cell Phone

The Requirements or Tools for this Tutorial 
1.  One cell phone with GPRS enabled.
2.  One Email ID 
3.  Microsoft Outlook on the PC to be put to shut down.
4.  Must have internet connection on your PC.

Using this method the user can shutdown, restart, hibernate the Computer just
by sending an email from their cell phone. All you need to have is Microsoft
outlook which comes with Microsoft word. The Microsoft outlook should be
installed on the PC you wish to shut down. First you need to create a batch file
to perform shutdown, restart etc. you can write them down yourself.

Note: you can complete this trick in every operating system but, here I’m representing this tutorial in “Windows 8 Pro”.
 
1.  Open your notepad and type the following:
         c:\windows\system32\shutdown -s - f -t 00
     And save it as shutdown.bat (Executable file) 

2.  Open your Microsoft outlook. Make sure that it is already configured for your email id, otherwise configured it here step by step for your email id. Note: you can complete this trick on Microsoft Office Outlook (any version like 2003, 2007, 2010). Here, I’m doing on MS Office Outlook 2010.
 
(1) After opening Outlook 2010, click on File in upper side left hand corner 
 

(2) Now, click on “Add Account” and Set up your account detail

 
(3) Now, click on “Next”. This auto account setup will configure your email server settings automatically. You can do this manually by selecting manually configure option in last step.
   

After this setup, finally click on Finish.

3. Now we will need to set Microsoft outlook in such a way that outlook checks you email every one minute. This can be set by going to “Send/Receive” tab-> “Send/Receive Group” -> “Define Send/Receive Groups”. After setting this click on close button.

4. Now, This step is to manipulate our computer (MS-Outlook) with Email message as for this, we have to set up of rules and alerts on outlook. So, again go to-> Tools – Rules and Alerts. Click on E-mail Rules tab. In new window select Check messages when they arrive and click Next

5. Now in next page, check on, on this machine only and with specific words in the subject. After checking these two values, click on specific words underlined.


          

6. Search Text window will open, in the input field type the command that shuts down the PC. You can use any commands. For prevention of accidental execution I kept %shutdown% as a command. Click on Add button after you are done and click on OK.

7. Now click on Next. In the next window check mark on start application. In the lower screen, click on application link.

8. Now you’ll be welcomed to your familiar file open window. Load all files. And select the batch file that you’ve created to shut down your PC.
                   

9. Click on Next, again click on next (don’t choose any things in this step). And finally click on Finish button.

10. You’ll have %shutdown% alert shown in the E-mail Rules tab.
                          

11. Now, when you send a message from your phone to your e-mail address with the Subject%shutdown% your computer will trigger shutdown.bat file and instantly executes the command in that batch file finally leading to shutdown the PC.

If you have any Suggestions or Enquiry Relayin comment box